---
title: "Webinar: What a PCIe Pre-Layout Assessment Catches | Fidus"
description: Live Dec 3, 1 PM ET. Ahmed Ibrahim walks through a real PCIe pre-layout assessment and shows where the channel breaks at Gen5, Gen6 and Gen7.
---

[Skip to main content](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#main)

![Fidus Systems](https://info.fidus.com/hubfs/logo-white.svg) ![logo-white](https://info.fidus.com/hubfs/logo-white.svg)

Open main navigation

Close main navigation

Live Webinar | Fidus Tech Talk

# What a Pre-Layout Assessment Catches: PCIe Gen5 to Gen7

Thursday, December 3, 2026 1:00 PM ET / 10:00 AM PT 30 min · Zoom

[Save my seat](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM)

Starts soon

### **What you'll learn**

01

Placement sets the budget

A 4.5-inch route and an 8 dB add-in card budget leave about 1 dB per inch. See how the floorplan picks your material before you do.

02

What passes Gen4 can fail Gen5

The same laminate and copper table from Gen4 to Gen7. At this length nothing on it meets Gen5, Gen6 or Gen7, so the fix is a shorter route or a retimer.

03

Reflections decide the impedance

85 or 100 ohms? Connector, via and finger reflections make the call.

04

Pre-layout numbers vs. the lab

SEASIM before layout, eye scans at BER 1e-14 on the finished board, and the one lane that needed Tx EQ.

### **Key details**

- **Date:** Thursday, December 3, 2026
- **Time:** 1:00 PM ET / 10:00 AM PT
- **Duration:** 30 minutes (20-minute talk followed by Q&A)
- **Speaker:** Ahmed Ibrahim, Senior Signal Integrity Specialist, Fidus

**Can't make it live?** Register anyway and we'll send you the recording.

### **About this webinar**

PCIe has gone from 2.5 GT/s to 128 GT/s, and the last three generations arrived fast, pushed by AI and data-center bandwidth. Every jump leaves less room for error on the board.

In this Tech Talk, Ahmed Ibrahim walks through one real pre-layout assessment on a Fidus FPGA add-in card, step by step: placement, loss budget, laminate and foil, stackup, impedance, vias and connector fingers, compliance and lab validation. Then he takes the same channel to Gen5, Gen6 and Gen7 and shows where it breaks.

Caught before layout, a channel problem costs a rule change. Caught at prototype, it costs a respin: $10,000 to $50,000 on a moderately complex high-speed board, before you count the schedule.

### Save your seat

Free · 30 minutes · Zoom

Sound familiar?

## Your PCIe link passes or fails before anyone routes a trace

01

Mechanical locked the placement, and now you have to say whether the link will close.

02

You chose a "low-loss" laminate and you are still not sure it is low enough for Gen5.

03

The board is back from fab and one lane only passes after Tx EQ tuning.

If any of these sound like your last board, this session is for you.[Save your seat →](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM)

**Gen4 → Gen7**one channel, four PCIe generations

**8 steps**from placement to the lab

**BER 1e-14**measured on the finished board

**20 min**talk, then Q&A

Inside the session

## One real assessment, step by step

1. ### Placement and budget
   
   How the floorplan fixes length and sets the dB-per-inch target.
2. ### Laminate, foil and stackup
   
   Which materials meet the target, and where they stop.
3. ### Impedance and vias
   
   85 vs 100 ohms, and tuning vias, AC caps and connector fingers.
4. ### Compliance and lab
   
   SEASIM before layout, then the eye scans on the real board.
5. ### Gen5, Gen6, Gen7
   
   Where the same channel breaks, and what fixes it.

Then Q&A: the questions engineers ask most about PCIe channel budgets.

Presenter

![Ahmed\_headshot](https://info.fidus.com/hubfs/Ahmed_headshot.jpg)

### Ahmed Ibrahim

Senior Signal Integrity Specialist, Fidus

Ahmed has spent over 12 years in PCB design for signal and power integrity, with prior roles at Ericsson, Fortinet, Microchip, in Canada and Sweden.

12+ years in SI/PI PCB designEricsson / Fortinet / MicrochipCanada and Sweden

Who should attend

## Ideal for engineers and technical leads working in

Signal integrity engineersPower integrity engineersPCB layout designersHardware design engineersFPGA board designersHardware engineering managersSystem architectsData center and AINetworking and storageSemiconductorTest and measurementAerospace and defense

Quick question

## A PCIe add-in card has a 4.5-inch route from the gold fingers to the FPGA. Which laminate do you need to pass Gen5?

[Mid-loss laminate, standard copper](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM) [Very low-loss laminate, HVLP copper](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM) [Extremely low-loss laminate, HVLP copper](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM) [None of them, at that length](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM)

The answer is D. On this board, even extremely low-loss laminate with HVLP copper misses the Gen5 budget. Ahmed shows why, and what to do instead, on December 3. [Save your seat →](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM)

## Catch it before layout

Thursday, December 3, 2026 · 1:00 PM ET / 10:00 AM PT

[Save my seat](https://info.fidus.com/webinar-what-a-pre-layout-assessment-catches-pcie-december-2026#FORM)

Know someone laying out a PCIe Gen5 board? Share this page with them.

[Share on LinkedIn](https://www.linkedin.com/sharing/share-offsite/?url=https%3A%2F%2Finfo.fidus.com%2Fwebinar-what-a-pre-layout-assessment-catches-pcie-december-2026) [Email a colleague](mailto:)

![Fidus Systems](https://info.fidus.com/hs-fs/hubfs/Fidus%20reverse%20w%20orange.png?width=120&height=48&name=Fidus%20reverse%20w%20orange.png)

© Copyright 2026 Fidus. All Right Reserved

[Privacy Policy](https://fidus.com/privacy-policy/)

[Accessibility Policy](https://fidus.com/accessibility-plan/)